Archive for the ‘Pin Nailer’ Category

Hitachi 725297 Round Head Framing Nailer Compressor Combo Kit

February 12th, 2013

One of Hitachi’s most popular nailers, and for good reason. It’s practically impossible to jam and fires a rapid three nails per second. At first gander, it appears heavy and unwieldy, but in hand, it’s amazingly well-balanced and comfortable, and Hitachi’s nailers are among the most reliable we’ve seen. It runs off air pressure of 70 to 120 psi, delivering plenty of "pow" even at the lower end. Hitachi recommends this model for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing, and mobile home and modular house construction. The accompanying EC12 compressor provides plenty of air pressure for any pneumatic nailer at 4 cubic feet per minute at 90 psi and a 14-second recovery time. The twin tanks are stacked, so it’s compact and portable, perfect for the job site at 60 pounds.–Kris Jensen-Van Heste

Grip-Rite GR100KIT2 2-Tool Compressor Combo Kit

February 11th, 2013

Porter-Cable CFFR350C Round Head Framing Nailer Compressor Combo Kit

February 11th, 2013

Porter-Cable CF6111 1-3/8-Inch Brad Nailer Compressor Combo Kit

February 9th, 2013

This Porter Cable air compressor/brad nailer combination kit provides you with everything you need to get started quickly. U.S.A.

Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit

February 8th, 2013

The CPACK3 combines three great Bostitch power fasteners with a compressor. This kit includes a 16-gauge 2-1/2-inch finish nailer, an 18-gauge 1-inch finish stapler, an 18-gauge 1-1/4-inch brad nailer, and a 2 horsepower air compressor that powers them all. And to get you started immediately, the CPACK3 also comes with a stash of nails, brads, staples, fittings, hoses, lubricant, and a contractor's canvas tool bag.
Straight Finish Nailer
The 16-gauge 2-1/2-inch straight finish nailer (SB-1664FN) drives straight finish nails from 1 to 2-1/2 inches. Its lightweight aluminum design makes it easy to hold and maneuver for precision fastener placement, and the no-mar tip protects your work surface. With a quick-release nose for fast jam clearing and an adjustable depth guide, this nailer is easy to use and quick to set. It also features a tool-free adjustable exhaust.
Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.
Key Technical Specs
Driving power: 300 in./lbs. Magazine capacity: 100 nails Operating pressure: 70-100 psi Thread fitting type: 1/4-inch NPT
Brad Nailer
The 18-gauge 1-1/4-inch brad nailer (SB-100SX) drives brad nails from 5/8 to 1-1/4 inches. Its lightweight aluminum design is easy to hold and comfortable to use, even over the long haul — and its no-mar tip helps protect your work pieces. This nailer also has an adjustable depth guide to set nails to your desired depths quickly and with minimal fuss, and it offers tool-free adjustable exhaust.
Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.
Key Technical Specs
Drives fastener sizes: 5/8-inch to 1-1/4-inch
Narrow Crown Stapler
The 18-gauge narrow crown stapler (SB-125BN) drives 7/32-inch crown SX staples from 1/2 to 1 inch. It has a lightweight aluminum design for added durability, a tool-free adjustable exhaust, and a no-mar tip to protect your work piece during use.
Applications
This crown stapler is ideal for all power stapling needs, including finishing trim, fastening papers, and almost anything else into wood or masonry.
Key Technical Specs
Drives fastener sizes: 1/2 to 1-inch Accepts 18-gauge, 7/32 inch crown SX staples
Air Compressor
The air compressor (CAP60P-OF) has a high efficiency 2 horsepower (peak) motor that produces 1.5 horsepower running. Its 6-gallon tank capacity gives you plenty of power and run time, and its no-maintenance, oil-free pump is easy to maintain and operate.
Key Technical Specs
3.4 cfm at 40 psi; 2.1 cfm at 90 psi 135 psi maximum output 6-gallon tank capacity
Warranty
The finish nailer, finish stapler, and brad nailer are all covered by a 7-year limited manufacturer's warranty; the air compressor is covered by a one-year limited warranty.
What's in the box:
Bostitch 16-gauge finish nailer, 18-gauge finish stapler, 18-gauge brad nailer, 2 horsepower oil-free air compressor, 1/4-inch by 40-foot heavy-duty airline with MPT fittings, 1,000 2-inch 16-gauge finish nails, 1,000 1-1/4-inch 18-gauge brads, 1,000 1-inch staples, tool lubricant, contractor's canvas tool bag.

Porter-Cable CF6221 Finish Nailer/Brad Nailer Compressor Combo Kit

February 7th, 2013

This Porter Cable combo kit includes two nailguns and a powerful compressor, everything you need to do the job. Great for molding & trim, furniture or other wood working projects. U.S.A. Includes two nailguns, Model#s FN205C and BN138 FN205C uses 16 gauge finish nails, 1in.-2 1/2in.L BN138 uses 18 gauge brad nails, 5/8in.-1 3/8in.L Nailers feature maintenance-free motors for long life Internal piston catch ensures consistent power on every shot Tool-free depth of drive adjustment with detents Tool-free jam release mechanism for easy nail removal Rear exhaust keeps contaminants away from work Compressor has an innovative shroud that allows for better protection and portability Weighs only 34 lbs. 6-gallon tank does big jobs on a single charge Maintenance-free pump for easy operation 120 Volt/10 Amp compressor

Porter-Cable Pc1Pak 2-1/2-Inch Finish Nailer Compressor Combo Kit

February 5th, 2013

This Porter combo kit includes a nailgun and a powerful compressor, everything you need to do the job. Great for molding & trim, furniture or other wood working projects.

SENCO PC1279 3-Tool Air Compressor Combo Kit

February 5th, 2013

Includes FinishPro35, 15-Gauge 2-1/2-in Angled Finish Nailer (ProSeries) – 1Y0001N, FinishPro2N1, 18 Gauge 1/4-in Crown 1-1/2-in Narrow Crown Stapler (ProSeries) – 1W0002N, FinishPro18, 2-in 18 Gauge Brad Nailer (ProSeries) – 1U0001N, 6 Gallon Pancake Oil-Free Air Compressor, 25-ft Air Hose, Tool Storage Bag

PROFESSIONAL 23 GA HEADLESS PIN FINISHING NAILER GUN

February 4th, 2013

Handles 23 Gauge Headless Pins From 15/32" to 1" In Length Perfect For Mirror & Picture Frames, Door & Window Trim, & More! Five Pin Length Settings: 15/32", 5/8", 23/32" , 3/4", 7/8" & 1" Comfort Grip Safety Trigger Rear Exhaust Magazine Capacity: 100 Pins Operating PSI: 50 to 100 PSI Air Inlet: 1/4" NPT

Air Locker P635K 23 Gauge 1/2 Inch to 1-3/8 Inch Pin Nailer Kit

February 3rd, 2013

The Air Locker P635K 23 gauge Pin Nailer is compact and light-weight but big on performance. It shoots all 23 gauge pin nails from 1/2 inch to 1-3/8 inch and produces a hole that is barely visible to the naked eye. It automatically adjusts to accommodate the length of the pin. The P635 23 gauge pin nailer is ideal for hobbies and intricate finish work. The kit includes 1/2", 5/8", 3/4", 1", 1-3/16" & 1-3/8" Micro Pins each of 2000/Pack. No air plug included.

RSS Feed

Search