Archive for the ‘Dremel’ Category

Power Carving Kit

February 19th, 2013

This new kit features both rotary and reciprocating action, and hand-held or flex-shaft carving! A high quality variable speed motor tool is the centerpiece of this kit. The unit features ball bearing construction, 1/8" collet with shaft lock for easy bit changes, folding bail for hanging the unit, and separate on/off switch and variable speed controls. When used in the hanging mode you can attach either the reciprocating or three jaw chuck rotary hand pieces to the 38" super flexible shaft. Complete kit includes: 5 piece ruby detailing burr set, two diamond burrs, two straight chisels (3/16" and 3/8") 3/8" curved chisel, 1/4" V-chisel, 3/8" gouge, hand piece wrench, shaft adapter nut, and a form fitted case.

Sioux 5978A 60000 RPM Pneumatic Pencil Grinder

February 19th, 2013

672-5978A Features: -Built-in speed regulator.-Remote exhaust.-Collet Size: 1/8 in.-Inlet Size: 1/4 in (NPT).-Hose Size: 3/8 in.-Control Type: Twist Throttle.-Wt.: 1/4 lb.-Price is for 1 Each. Includes: -Includes: 60 in. Hose w/Hose Protector. Specifications: -Power Cap.: 1/10 hp. Dimensions: -Length: 5.300 in.

Magnate M72.625E38T3 Carbide Tipped Bandsaw Blade, 72-5/8″ Long – 3/8″ Width; 3 Tooth

February 18th, 2013

The picture depicted represents one blade; the pricing is for one blade/package. NOTE: The owner's manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.e. steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 72-5/8 inch ( 6 ft. 5/8 inch, 6' 5/8" ) bandsaw blades suit the following models: 10" Sears Craftsman;10" Skil HD3640; Dremel 1120; If in doubt, to determine bandsaw blade length: 1 – Check the owner's manual of your bandsaw machine for specifications – not only the length, but also the range of the width and thickness.2 – If the owner's manual is not available, refer to previous invoices.3 – Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 – Upon requested, Magnate makes blades of any length and types to fit your brand and model.

Magnate M72.625E38V3 Carbide Tipped Bandsaw Blade, 72-5/8″ Long – 3/8″ Width; 3-4 Variable Tooth

February 18th, 2013

The picture depicted represents one blade; the pricing is for one blade/package. NOTE: The owner's manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.e. steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, M42 bi-metal blades when cutting wood, especially tropical hardwoods i.e. ebony, koa or cocabolo, abrasive non-ferrous materials. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 72-5/8 inch ( 6 ft. 5/8 inch, 6' 5/8" ) bandsaw blades suit the following models: 10" Sears Craftsman;10" Skil HD3640; Dremel 1120; If in doubt, to determine bandsaw blade length: 1 – Check the owner's manual of your bandsaw machine for specifications – not only the length, but also the range of the width and thickness.2 – If the owner's manual is not available, refer to previous invoices.3 – Cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the most possible accurate length.4 – Upon requested, Magnate makes blades of any length and types to fit your brand and model.

Pearl Drills 2 Sided- 1.0mm, ONE DOZEN (12)

February 17th, 2013

Made of long lasting High Speed Steel. The tips are designed to prevent chipping of pearls Each pearl drill is double-sided with the bit meeting in the center. Use for full-drilling and half-drilling. Use for full-drilling a hole in pearls for necklaces, earrings and bracelets. Use for Half-drilling to realize your designs for earrings, rings, pendants, broaches and other designs. Use for drilling holes into Freshwater, Cultured to Akoya and Tahitian Pearls. One Dozen (12) Pearl Drills.

Wholesale Lot 20 Cordless Rechargeable Rotary Tool 9.6V

February 17th, 2013

You are bidding on a brand new, wholesale lot of 20 Rechargeable Rotary Tools with 9.6Vs of power. Each tool comes with 3 1/2 x 1/2" sanding sleeves and 1 rubber Mandrel. Additionally, each comes with a power cord and stand for easy recharging.

Wholesale Lot 30 Cordless Rechargeable Rotary Tool 3.6V

February 17th, 2013

You are bidding on a brand new, wholesale lot of 30 Rechargeable Rotary Tools with 9.6Vs of power. Each tool comes with fifteen 1/2" sanding sleeves and 1 rubber Mandrel. Additionally, each comes with a power cord for easy recharging.

Neiko 20-Piece Double Cut Carbide Rotary Burr Set

February 17th, 2013

Durable double cut carbide rotary burr set with 1/4-inch shank size, fits dremel and all brand grinders. Package comes with 20 pieces of carbide rotary burrs. Specification (in inches) – *Cylindrical (no end cut): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Cylindrical (with end cut): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Cylindrical (ball nose): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Ball: -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Oval: -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Tree (radius end): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Pointed Tree (pointed end): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Flame: -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Taper (14 degree): -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall *Pointed Cone: -1/4 diameter, 5/8 flute length, 2 overall -3/8 diameter, 3/4 flute length, 2-1/2 overall

SE Minature Table Saw 4 “

February 16th, 2013

Our 4" Miniature table saw is perfect for hobby and model work.

Zyliss Torno Drill Driven Mini Lathe

February 15th, 2013

Using the same portable clamping system as the z-Vise, this handy tool lets you create beautiful and valuable turnings almost anywhere, powered by your drill. Your TORNO includes a sturdy mainframe, toolrest, turning center, and live center. Fits stock up to 22" long and 7-1/2" in diameter. PLease Note: your drill MUST have a collar diameter of either 43mm (Euro standard) or 38mm/1.5" (common US standard). Also, if your chuck is larger than the neck, you may need to remove the chuck in order to install the drill in your TORNO.

RSS Feed

Search