Archive for the ‘Drill’ Category

Precision Twist C8R56 High Speed Steel Reduced Shank Drill Bit Set with Metal Case, Black Oxide Finish, 118 Degree Conventional Point, Inch, 8 piece, 9/16″ to 1″ x 16ths

March 9th, 2013

This Precision Twist C8R56 reduced shank drill bit set contains 8 high-speed steel drill bits, including inch sizes 9/16" through 1" in 1/16" increments, with a black oxide finish and a 118-degree conventional point for use with drilling machines with a 1/2" chuck to create large holes in ferrous materials. High-speed steel (HSS) provides hardness for wear resistance, and the black oxide finish acts as a lubricant to reduce wear while promoting chip and coolant flow. Commonly called Silver and Deming drill bits, these reduced shank drill bits have a drilling depth of 4 times their diameter and a standardized 1/2" diameter round shank, which enables drills with a 1/2" chuck to create holes with diameters larger than the chuck. The set comes in a metal index case with labeled compartments for identification and organization. Drill bits conform to American National Standards Institute (ANSI) standards.

Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach to work with the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with either a 1/2" or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra long twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.
(more…)

Metabo SB18 LT 602141520 18-Volt LiPower Hammer Drill/Driver

March 9th, 2013

Includes SB18 LT Lithium-Ion Cordless Hammer Drill/Driver – 602141520, Keyless chuck – 301003051, (2) 18V batteries – 625457001, Charger – 627058000

Bosch 11240 1-9/16-Inch 10 Amp SDS-Max Combination Hammer

March 8th, 2013

Includes 1-9/16-in SDS-max Combination Hammer – 11240-RT, Auxiliary Handle – 2 602 025 062, Carrying Case – 3 605 438 536

Makita BL1830-2 18-Volt 3.0 AH Battery, 2-Pack

March 8th, 2013

The Makita LXT 18-Volt 3-Ah Lithium-Ion Battery boasts more power, less weight, and a better fit. The optimum charging system produces 280 percent the total lifetime of standard batteries, with twice the number of cycles. With a five times lower self-discharge, this lithium-ion battery is ready for use, even after long periods of storage. Built-in features include shock-absorbing to protect the battery and a memory chip that communicates with the charger to maximize battery life using three active controls: current, voltage and thermal. Sixteen firm holding contact terminals reduce the risk of power loss/fluctuation in high-vibration work environments. This battery comes with a 1-year limited warranty.

Milwaukee 2603-22CT 18V Cordless M18 FUEL Lithium-Ion Drill Driver

March 8th, 2013

Includes 18V Cordless M18 FUEL Lithium-Ion Drill Driver -2603-22CT, (2) M18 COMPACT REDLITHIUM Batteries, Multi-Voltage Charger, Product Manual

Chicago Latrobe 150T Series High-Speed Steel Jobber Length Drill Bit Set With Metal Case, TiN Coated, 118 Degree Conventional Point, Inch, 29-piece, 1/16″ – 1/2″ in 1/64″ increments

March 8th, 2013

This Chicago-Latrobe 150T series jobber length drill bit set contains 29 high-speed steel drill bits, including inch sizes 1/16" through 1/2" in 1/64" increments, with a TiN coating and a 118-degree conventional point for use in high-speed drilling applications on ferrous and nonmetallic materials. High-speed steel (HSS) provides hardness for wear resistance. The titanium nitride (TiN) coating withstands higher drilling speeds, increases drill bit hardness, and extends tool life when compared to uncoated tools. A jobber length drill bit has a versatile midrange drilling depth that is a common choice for general-purpose drilling applications. The round shank accommodates most drill chucks.

The set comes in a gray epoxy-coated steel index case with labeled compartments for identification and organization. Case measures 7-1/4 x 4-3/8 x 1-7/8 inches (H x W x D). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)
(more…)

DEWALT DWD215G 1/2-Inch 10-AMP Mid Handle Grip Drill

March 8th, 2013

Versatile and easy to handle, the DEWALT DWD215G 1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck delivers the power you need for all your home-improvement projects. The drill features a variable-speed trigger, a convenient reversing switch, a comfortable mid-handle grip, and an auxiliary handle.

1/2-Inch VSR Mid-Handle Grip Drill with Keyless Chuck
At a Glance:Reliable, 10 amp DEWALT-built motor
(more…)

Hitachi DS18DLPR 18-Volt 1/2-Inch Lithium-Ion Driver Drill

March 8th, 2013

Hitachi DS18DLPR 18-Volt 1/2-Inch Lithium-Ion Driver Drill

DEWALT D25023K 7/8-Inch Compact SDS Rotary Hammer Kit

March 8th, 2013

Designed to provide powerful, precise performance, even in tight spaces, theDEWALT D25023K 7/8-Inch Compact SDS Rotary Hammer Kit gives you the versatility and control you need to complete a range of applications: rotary hammer, rotary only, and chiseling. Its compact, lightweight design makes the D25023K easy to handle in a variety of orientations so you can work comfortably, longer–even when drilling overhead.

7/8-Inch Compact SDS
Rotary Hammer Kit
At a Glance:6.9 amp motor for power and overload protection: (0-1,550 rpm; 0-4,550 bpm)
(more…)

Ingersoll Rand Quiet Technology Air Drill – 1/2in. Keyless Chuck, Model# 7803RAKC

March 8th, 2013

Air drill features a lightweight, compact aluminum housing and reversible motor with quick-release lever. Variable-speed trigger for precise speed control. Chuck Size (in.): 1/2, Keyless Chuck: Yes, Variable Speed: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Speed (RPM): 500, Reversible: Yes, Side Handle: No, Air Consumption (CFM): 4

RSS Feed

Search