Archive for April, 2013

Forrest MM12102 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Aluminum Cutting Circular Saw Blade

April 29th, 2013

Craftsman 9-21828 Professional 15 amp 10″ Professional Jobsite Saw

April 28th, 2013

General International 20-100 M1 Variable Speed Power Feeder

April 27th, 2013

This compact power feeder is great addition to any home workshop. Designed to be universally adaptable on a variety of wood working tools, including table saws, bandsaws, shapers, and jointers. Features variable speeds in forward and reverse, high-grip polyurethane rollers, and an adjustable mounting plate that fits a variety of machines. Specifications: Speed Range: 6.5 to 40 FPM. Number of Rollers: 3 roller sizes: 3" x 1-3/16". Minimum Length of Stock: 3-1/2". Dust Chute: 2-3/4" (Note: Dust Chute will have to be punched out for use). Roller Suspension. 5/8" Motor, 1/8 HP 110V 1PH, 1.2 A.

Hitachi 725216B50 140-Teeth 7-1/4-Inch Steel Saw Blade, 50-Pack

April 26th, 2013

Hitachi 725216B50 140-Teeth 7-1/4-Inch Steel Saw Blade, 50-Pack

Woodhaven 4951 Large Cut-off Sled

April 24th, 2013

This is the safest and most accurate way to cut large parts on a table saw. Our 4951 Cut-Off Sled functions like a sliding table saw, but at a fraction of the cost! 2-3/8" thickness capacity on a 10" saw. Clear Guard protects you from debris and allows visibility. Handles stock up to 26-1/8" wide. Maximum part width between fence and Outboard Toggle Clamp is 22-1/2". Weighs 52 lbs. and measures 31-3/4" x 47-1/2" assembled. Extra 4519S Flip Stops available. Extra 24" Ultra Track and Track Connector to extend fence available. Optional 500 lbs. Inboard and Outboard Toggle Clamps available for maximum part holding force. Toggle Clamps are visible in image as an example but are not included with the 4951.

Incra LS25SYS 25″ Range Positioner with Pro-II Joinery Fence System

April 24th, 2013

Forrest MM12106 Miter Master 12-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade

April 23rd, 2013

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1' to 2' hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result…no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.20�� Face Hook for easy feedDOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.Ends second-step finishing (jointing and sanding not required).Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).Ends cutting 1/16' oversize to allow for RESURFACING

Factory-Reconditioned Ryobi ZRWS750L 9 Amp 7-in Portable Tile Saw w/ Laser and Stand

April 23rd, 2013

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 9 Amp 7-in Portable Tile Saw w/ Laser and Stand – ZRWS750L, Stand, Laser, Submersible Pump, Wheel Wrench, Hex Key with Phillips Tip, Rip Guide, Operator's Manual

Jet 708124 XLIFT-K: Xacta-Lift Router INS w/ DLX Fence

April 21st, 2013

Includes XLIFT-K XACTA Lift w/ Deluxe Fence – 708124

Woodhaven 4965 Super Sled

April 21st, 2013

The Super Sled does it all! The sliding platform measures 23-3/4" square x 3/4" thick. It provides a zero-clearance edge for easy part alignment and clean cuts. Designed to be used on a table saw with at least a 27" deep table. 2-3/8" thickness capacity on most 10" saws. Platform supports parts for crosscuts up 19-1/4" wide (fully supported on platform) or 17-1/4" wide with platform toggle clamps attached. 28" taper length capacity.
Includes a 23-3/4" adjustable steel miter bar that eliminates any side play. Bar rides in your saws 3/8" x 3/4" miter slot. Slot must be between 4" to 7-1/2" from the blade, measured from the blade side of the slot. Can be used in the left or right miter slot. Bar attaches to the platform for either crosscut or taper operation and switches in minutes.
32" Ultra Track fence mounts horizontally for tapers or vertically for crosscuts. Fence can be pivoted clockwise or counterclockwise on the platform for unlimited crosscut and taper settings. All fence adjustments made with knobs.
Indexing holes in platform and stainless steel indexing pins set the fence at the most common angles of 0, 15, 22.5, 30, 36 & 45º. Like our Deluxe Miter gauge, this pin setting method takes the guess work out setting angles and insures the best accuracy. Angles are engraved in the platform for easy reference. Other angles can be set using our optional Mite-R-Gage, or a digital protractor you supply.
Includes a 4519 3" Straight Flip Stop for use with crosscut work on the vertical fence.
Includes an edge stop for use with taper work on the horizontal fence.
Includes two 500 lb. toggle clamps and hardware. Clamps hold stock up to 1-3/4" thick and mount on the horizontal fence for holding tapers, or to the platform for holding crosscuts.
Optional 6305R 1" Riser Kit increases toggle clamp capacity to 2-3/4" thick stock, one required for each clamp.
Optional 789S Flip Stop is used with the fence in the horizontal position.

RSS Feed

Search