Stanley Bostitch CPACK3 Finish Nailer, Brad Nailer, Finish Stapler, and Compressor Combo Kit

February 8th, 2013

The CPACK3 combines three great Bostitch power fasteners with a compressor. This kit includes a 16-gauge 2-1/2-inch finish nailer, an 18-gauge 1-inch finish stapler, an 18-gauge 1-1/4-inch brad nailer, and a 2 horsepower air compressor that powers them all. And to get you started immediately, the CPACK3 also comes with a stash of nails, brads, staples, fittings, hoses, lubricant, and a contractor's canvas tool bag.
Straight Finish Nailer
The 16-gauge 2-1/2-inch straight finish nailer (SB-1664FN) drives straight finish nails from 1 to 2-1/2 inches. Its lightweight aluminum design makes it easy to hold and maneuver for precision fastener placement, and the no-mar tip protects your work surface. With a quick-release nose for fast jam clearing and an adjustable depth guide, this nailer is easy to use and quick to set. It also features a tool-free adjustable exhaust.
Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.
Key Technical Specs
Driving power: 300 in./lbs. Magazine capacity: 100 nails Operating pressure: 70-100 psi Thread fitting type: 1/4-inch NPT
Brad Nailer
The 18-gauge 1-1/4-inch brad nailer (SB-100SX) drives brad nails from 5/8 to 1-1/4 inches. Its lightweight aluminum design is easy to hold and comfortable to use, even over the long haul — and its no-mar tip helps protect your work pieces. This nailer also has an adjustable depth guide to set nails to your desired depths quickly and with minimal fuss, and it offers tool-free adjustable exhaust.
Applications
Use this nailer to affix interior or exterior finish and trim, to fasten furniture, handle cabinet work, and work on staircases.
Key Technical Specs
Drives fastener sizes: 5/8-inch to 1-1/4-inch
Narrow Crown Stapler
The 18-gauge narrow crown stapler (SB-125BN) drives 7/32-inch crown SX staples from 1/2 to 1 inch. It has a lightweight aluminum design for added durability, a tool-free adjustable exhaust, and a no-mar tip to protect your work piece during use.
Applications
This crown stapler is ideal for all power stapling needs, including finishing trim, fastening papers, and almost anything else into wood or masonry.
Key Technical Specs
Drives fastener sizes: 1/2 to 1-inch Accepts 18-gauge, 7/32 inch crown SX staples
Air Compressor
The air compressor (CAP60P-OF) has a high efficiency 2 horsepower (peak) motor that produces 1.5 horsepower running. Its 6-gallon tank capacity gives you plenty of power and run time, and its no-maintenance, oil-free pump is easy to maintain and operate.
Key Technical Specs
3.4 cfm at 40 psi; 2.1 cfm at 90 psi 135 psi maximum output 6-gallon tank capacity
Warranty
The finish nailer, finish stapler, and brad nailer are all covered by a 7-year limited manufacturer's warranty; the air compressor is covered by a one-year limited warranty.
What's in the box:
Bostitch 16-gauge finish nailer, 18-gauge finish stapler, 18-gauge brad nailer, 2 horsepower oil-free air compressor, 1/4-inch by 40-foot heavy-duty airline with MPT fittings, 1,000 2-inch 16-gauge finish nails, 1,000 1-1/4-inch 18-gauge brads, 1,000 1-inch staples, tool lubricant, contractor's canvas tool bag.

Factory-Reconditioned Stanley Bostitch U/CPACK300 3-Tool and Compressor Combo Kit

January 31st, 2013

The Bostitch 3-Tool and Compressor Combo Kit bundles the 18-Gauge 2-Inch Brad Nailer, the 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler, and the 16-Gauge 2-1/2-Inch Straight Finish Nailer, along with the powerful 6-Gallon 2.0 HP (Peak) Oil-Free Compressor. This kit gives you the versatility you need for tackling a wide variety of finish and trim projects.

This kit includes a powerful oil-free compressor and 3 finish and trim tools. View larger.
The Bostitch 3-Tool and Compressor Combo Kit offers tools with: No-mar tip protects work surface for smooth, damage free work Tool-free adjustable air exhaust systems for user comfort High magazine capacity for decreased reloads Tool-free adjustable depth guide for setting nails to desired depths quickly and conveniently (Finish Nailer & Brad Nailer)
The finish nailer is ideal for baseboards and window and door casings. View larger.
The brad nailer is handy for staircase and cabinetry applications. View larger.
The finish stapler is great for cabinet work, carpet laying, and upholstering furniture. View larger.
The compressor's impact-resistant shroud with integrated handle protects gauges from jobsite damage. View larger. Pneumatic Fastening for Fast, Accurate Detail Work
Detail work comes in many shapes and sizes and requires you to use different types of materials. Choosing the right tool for each job is an essential part of making certain your finished products look their best. That's why this kit sets you up with three distinct pneumatic fastening tools.
Each of these well-balanced tools is designed to sit neatly in your hand, letting you maintain control and precision. And each offers a wide range of simple, intuitive features, from no-mar tips that protect your work surface to tool-free adjustable exhaust systems that direct air away from your face to keep you comfortable while you work.
Three Dependable Tools for Handling Tough Jobs
The included 16-Gauge Straight Finish Nailer offers a convenient, adjustable depth guide and a quick-release nose for fast jam clearing. It is designed for handling nails 1 to 2-1/2 inches long, making it a great pick for moldings and door and window casing applications. The nailer provides 300 in./lbs. of driving power, a magazine capacity of 100 nails, and weighs in at four pounds.
Ideal for everything from staircases to cabinetry applications, the included 18-Gauge Brad Nailer makes use of the adjustable depth guide to set nails to desired depths quickly and conveniently. Behind its fast, reliable performance is the ability to deliver 145 in./lbs. of driving power. This nailer handles 18-gauge brads from 5/8 to 2 inches and weighs just 2.7 pounds.
Also included in the kit is the 18-Gauge Narrow Crown Finish Stapler, because whether you're working with cabinetry, floor underlayment, or upholstering furniture, a stapler is the right tool for the job. This stapler utilizes 135 in./lbs. of drive power to secure 7/32-inch narrow crown staples, features a bottom-load magazine for fast loading and easy jam clearing, and weighs 2.6 pounds.
All three of these tools offer a magazine capacity of 100 fasteners, so you don't constantly have to stop and reload, and each one is backed by a manufacturer's 7 year limited warranty.
Durable Six-Gallon Oil-Free Compressor
Built to keep your tools running smoothly and reliably, the 2.0 HP (Peak) Compressor delivers 2.8 CFM at 90 PSI with a maximum operating pressure of 150 PSI for improved tool performance. This compressor's oil-free pump design requires less maintenance than traditional models, and its large, six-gallon reserve tank includes a ball-type drain valve for easy drainage at the end of each day. It also employs an impact-resistant composite shroud to protect important gauges from job-site damage.
Heavy-Duty Motor Operates Smoothly and Quietly
The compressor's 2.0 HP (Peak), 1.5 HP running motor features easy startup and an expert design that draws 12 Amps without tripping your circuit breakers, so work can be done hassle-free. And the compressor's operation acoustics run at a quiet 72 dBA, making it ideal for use in smaller or more populated areas. The compressor is backed by a 1 year warranty.
Note to customers: When operating the compressor be sure the draincock is closed and the quick disconnect is not stuck. Either issue will prevent the compressor from working properly.
(more…)

Factory-Reconditioned Bostitch CPACK2A-R 2-Tool Finish & Brad Compressor Combo Kit

January 28th, 2013

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 2 HP (Peak) 6 Gallon Oil-Free Compressor – U/CAP2000P-OF, 2-in 18-Gauge Brad Nailer – U/SB-1850BN, 2-1/2-in 16-Gauge Finish Nailer – U/SB-1664FN, 1/4-in x 25 ft PVC Hose with Fittings, Tool Lubricant, Contractor's Tool Bag

Stanley Bostitch CPack1850BN 2-Inch Brad Nailer and Compressor Combo Kit

January 27th, 2013

Includes 2.0 HP (Peak) Oil-Free Compressor – CAP2000P-OF-R, 2-in 18-Gauge Brad Nailer – SB-1850BN-R, 1/4-in x 25-ft PVC Air Hose With Fittings

23 Ga. Headless Pinner Kit

January 25th, 2013

688-HP118K Features: -19pct greater pin capacity over competitive models for a wider range of fasteners.-Adjustable high/low power control sets pin depth without changing compressor setting.-Low profile nosepiece tapers down to contact point for clear line-of-site.-Wire Size: 23 gauge.-Nail : 1/2 in [Min], 1 3/16 in [Max].-Operating Pressure: 70.0 psi [Min], 100.0 psi [Max].-Operating Type: Dual Safety Trigger.-Impact: 60.00 in lb.-Power to Weight Ratio: 26.-Inlet Size: 1/4 in (NPT).-Handle Type: Centered Pistol Grip. Includes: -Includes: Case, Oil, (500 EA) 1/2, 3/4, 1 in. Pins, 1/4 in. Air Fitting. Color/Finish: -Applications: Finishing.

Stanley Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer

January 24th, 2013

The Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Headless Pin Nailer delivers the accuracy and comfortable handling you need to make quick work of detailed finish, trim, and woodworking projects. This pin nailer offers you the power of pneumatic action backed by Bostitch's long history of producing innovative fastening technology for dependable on-the-job performance.

The Bostitch 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer features: Tapered nosepiece for spot-on precision 60 in./lbs. driving power for secure nailing Wide range of 23-gauge pin nails for ultimate versatility Reversible Belt hook for added convenience
The kit includes the pin nailer, tool lubricant, and a set of 23-gauge pin nails, all transportable in an exclusive Bostitch carrying case. View larger .
The over-molded comfort grip is designed for easy, no-slip maneuvering. View larger .
The tapered nosepiece achieves precision for intricate work like picture framing. View larger . Powerful, Adjustable Fastening for Precise, Clean Work The Bostitch HP118K is well-suited for use with slim or delicate materials that might be split by an 18-gauge nail or brad. With this tool and set of 23-gauge pin nails, you can save time and money by preventing damage to work surfaces. An ideal choice for woodworking applications, the HP118K provides effective fastening for glue sets that are tough or impossible to clamp, and it will help you avoid the witness marks or holes that can be left by other driver heads, letting you create clean finished products.
Designed to keep you in control at all times, this nailer offers an adjustable high/low power control that sets pin depths without requiring you to adjust your compressor setting. It backs this precision with the ability to deliver 60 in./lbs. of driving power, so you can be sure that each pin is securely seated.
With the ability to handle 23-gauge headless pin nails that range from 1/2 inch to 1-3/16 inches, this nailer enables you to utilize a wide range of fasteners for job-specific performance. And its magazine capacity of 200 pins allows you to work without stopping to reload.
Ergonomic Design for Comfort and ConvenienceThe HP118K offers a full range of design features dedicated to smooth, safe, and intuitive use. It features a low-profile nosepiece that tapers down to the contact point which offers a clear line-of-site for perfect placement. An over-molded grip ensures slip-free handling, and it is balanced to sit comfortably in your hand during extended use. And, for added comfort while you work, the nailer's rear exhaust directs air away from your face. The pin nailer also features a reversible belt hook for convenience on the job.
Its compact body is easy to maneuver, which is of particular importance when doing intricate work like crafting custom cabinetry or picture frames, and, thanks to a durable, lightweight aluminum housing, it weighs just 2.5 pounds.
Reliable, Pneumatic Performance
This lightweight durable tool operates between 70 and 120 PSI and includes a 1/4-inch NPT fitting for easy coupling with your air hose and compressor.
This pin nailer is backed by a manufacturer's 7-year limited warranty.
How to Load the HP118K
1. Depress the spring loaded lever as shown bewlow in loading instructions Fig.1.
2. Pull sliding portion of magazine back as shown bewlow in loading instructions Fig.2
3. Load the stick of pins as shown bewlow in loading instructions Fig.3 with the arrow pattern pointing down as shown. If pins have black dots instead of arrows, the dots should be positioned up.
4. Close magazine as shown bewlow in loading instructions Fig.4 until it latches in the forward position. The tool is now ready for use.
What's in the Box
HP118K 23-Gauge Pin Nailer; 1/4-inch air fitting; 500 each of 1/2-inch pins, 3/4-inch pins, and 1-inch pins; tool lubricant; and carrying case.
(more…)

Stanley Bostitch CPACK300 3-Tool and Compressor Combo Kit

January 23rd, 2013

The Bostitch 3-Tool and Compressor Combo Kit bundles the 18-Gauge 2-Inch Brad Nailer, the 18-Gauge 1-1/2-Inch Narrow Crown Finish Stapler, and the 16-Gauge 2-1/2-Inch Straight Finish Nailer, along with the powerful 6-Gallon 2.0 HP (Peak) Oil-Free Compressor. This kit gives you the versatility you need for tackling a wide variety of finish and trim projects.

This kit includes a powerful oil-free compressor, 3 finish and trim tools, tool lubricant, finish nails, brad nails, staples, and a canvas tool bag to keep everything organized. View larger.
(more…)

Factory-Reconditioned Stanley Bostitch U/HP118K 23 Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer

January 23rd, 2013

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 1-3/16-in 23-Gauge Headless Pinner – U/HP118, Carrying Case

Factory-Reconditioned Stanley Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit

January 23rd, 2013

The Bostitch CPACK1850BNR Factory Reconditioned CPACK1850BN 2-inch Brad Nailer and Compressor Combo Kit is a great entryway into pneumatic tools. With the Bostitch SB-1850BN Factory Reconditioned 2-Inch brad nailer and the CAP2000P-OF Factory Reconditioned oil-free compressor you are getting the perfect combo kit for all of your around-the-house projects. In addition to the tool and compressor, you also receive a tool lubricant and carrying case. with the CPACK1850BN there isn't a project that you can't tackle. Features: Oil-free pump requires less maintenance 2.8-CFM @ 90-PSI with 150 max. operating pressure for improved tool performance Large 6-gallon reserve tank with ball-type drain valve for easy drainage Impact-resistant composite shroud protects gauges against jobsite damage Adjustable depth guide sets nails to desired depths quickly and conveniently Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface Recoil-style air hose included (shown with regular air hose NOT included) What's In The Box: CAP2000P-OFR 2.0 HP (Peak) Oil-Free Compressor SB-1850BNR 2-inch 18 GA Brad Nailer 1/4-inch x 25-foot PVC Recoil-Style Air Hose With Fittings Tool Lubricant Carrying Case

RSS Feed

Search