Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck

October 28th, 2013

Includes Reversible NOVA G3-D Woodturning Chuck – 46-461

DELTA 34-555 Sliding Table Attachment

April 19th, 2013

DELTA 78-968 Table Saw Anti-Kickback

February 22nd, 2013

Designed to reduce dangerous kickbacks, this spreader snaps on instantly and removes easily from Delta and other table saws.

DELTA 78-200 Biesemeyer Commercial Table Saw Fence Only (Rails Required), White

February 19th, 2013

The DELTA 78-200's easy-gliding Biesemeyer Commercial Fence Body handles quick, repetitive cut-off work for precision ripping and squaring. A 3-point locking system and hairline pointer with built-in steel tape keep the fence parallel to the blade and accurate to within 1/64 of an inch. Able to rip to the right or left, this fence system offers unparalleled versatility. Universal mounts make this fence system easily attachable to almost any table saw. Built to last, the Biesemeyer Commercial Fence System is constructed of nine-ply Finland birch and equipped with high-impact laminates that are hand-fitted to solid steel angle iron and tubing.

DELTA BC30 30 Inch Commercial Biesemeyer Table Saw Fence

February 16th, 2013

The DELTA BC30 30-inch Commercial Biesemeyer Table Saw Fence features a three-point locking system and hairline pointer that lets you do precise table saw work to within 1/64 of an inch. This commercial 30-inch Biesemeyer Table Saw Fence can be mounted on almost any table saw. It has a built-in steel tape. The fence body glides easily and can rip to either side of the blade, making it great for repetitive cut-off work, precise ripping, and squaring cuts. It has a built-in steel tape, and is built out of nine-ply Finland birch with high-impact laminates and fit to solid steel tubing for durability.

DELTA BC50 Biesemeyer Commercial Table Saw Fence System

February 11th, 2013

The DELTA BC50 Left Handed Biesemeyer Commercial Table Saw Fence System can be used with almost any table saw. The fence is 42 inches long and 2-1/2 inches high. The fence body is easy gliding and can handle cut-off work, precision ripping, and squaring cuts. Made of 9-ply Finland birch and high-impact laminates, the fence system is strong enough for commercial use. It has a three-point locking system, as well as a hairline pointer with built-in steel tape. The Fence System includes a T-square fence, front and rear guide rails, front guide tube, and mounting hardware.

DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard

January 30th, 2013

The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade guard doesn't have to be removed. For through-cutting, the guard has a removable splitter with anti-kickback pawls that afford the operator additional safety. With a U-shaped support arm, you'll be able to cut the full capacity of the fence; you can also keep half the guard elevated for use of a push stick when cutting with the fence close to the blade. The Uniguard Table Saw Blade Guard comes includes the guard, splitter, table mounting bracket, support arm and extension.

DELTA 34-184 Universal-Deluxe Tenoning Jig

January 28th, 2013

When you need perfect, tight joints, the DELTA 34-184 Universal-Deluxe Tenoning Jig will give you professional results every time. The DELTA 34-184 is designed to work with any table saw with a 3/8-inch by 3/4-inch miter slot, standard on almost all table saws. It is made of durable, CNC precision milled cast iron, and can be used with both right and left tilt saws. The jig can be adjusted from 45 to 90 degrees with adjustable positive stops, and there's a micro-fine adjustment knob for fine width-of-cut settings down to 4/1000-inch. By pushing a button, you can make for macro adjustments.
Unlike most jigs that require tools to make adjustments, the DELTA 34-184 features a large thumbscrew that allows for tool-less adjustments. With two ergonomic handles, you'll be able to make smooth cuts every time easily and comfortably. The jig handles up to 3-1/4-inch thick stock and features a quick-release hold down clamp for efficient work. The jig measures 11.8 x 12 x 8.2 inches and weighs 21.3 pounds.

DELTA 78-902 42-Inch Table Saw Fence

January 28th, 2013

Factory-Reconditioned DELTA 33-411R 16-Inch 5 Horsepower Radial Arm Saw, 230/460-Volt 3 phase

January 21st, 2013

Factory Reconditioned. Delta Industrial 16" Radial Arm Saw Model 33-411 include 5HP, 230/460V, three phase TEFC motor with electro-mechanical blade brake; 16" blade guard with anti-kickback attachment; retractable leaf guard; cutterhead return attachment; 16" combination blade; cuttinghead clamp knob; adjustable crosscut stop and steel legs.

RSS Feed