Festool 496942 Centrotec 8-Piece Imperial Wood Drill Bit Set With Countersink

March 5th, 2013

Includes Imperial Wood Drill Set, Drill Bits – 1/8-in, 3/16-in, 1/4-in, 5/16-in, 3/8-in, 7/16-in, 1/2-in, 3/16-in – 19/32-in Countersink, Centrotec 1/4-in Hex Shank

Festool TS 55 EQ Plunge Cut Circular Saw (set)

March 3rd, 2013

Festools TS 55 EQ keeps all the great features of its predecessor and adds new features that make the plunge saw more convenient, more capable and more user friendly. A new, larger Thumb Interlock makes it easier to switch on the power and pivot the blade down for cutting, while a new Blade Lock disconnects the power switch, and locks the blade down in position for removal. Plunge cuts in the middle of a workpiece are easier than ever, since the riving knife is now spring loaded, and automatically retracts when plunging. When used with the Festool Guide rail system, the TS 55 ideal for installation of laminate flooring systems, and allows cutting just 3/8" off a wall. Cross cutting veneered materials with most circular saws leaves a splintered mess. Festools new sacrificial Splinter Guard rests on the workpiece directly above the cut, providing "zero clearance" support at the blade for the top veneer, resulting in clean, chip-free cuts in melamine, veneered plywood, and even high-pressure laminates. The suggested 55" guide rail allows for fast precise cuts with little or no setup time, since the edge guide automatically aligns to the cut-line. Electronic variable-speed control automatically maintains a constant blade speed under load, and the soft start and automatic idle cut down on operator fatigue and noise. Surprisingly, the Festool TS 55 EQ uses a 6-1/4" diameter blade, but still provides a 1-15/16" cut at 90 degrees, and 1-7/16" cut at 45 degrees — plenty to cut construction 2x stock. Festool TS 55 EQ includes a systainer storage box, 48-tooth carbide tipped blade, 55" guide rail, limit stop and chip deflector.

Festool 495968 Kapex Miter Saw Cutting Extension, Right Side

February 6th, 2013

When fully extended, will accommodate materials up to 16 feet in length, expanding for a range from between 60-3/4 inches to 91 inches, from the blade. An adjustable flip stop travels the entire length of the extension, providing accurate and repeatable measurements. A crown support provides additional support for taller materials up to 5-5/8". Includes measuring tape with metric and imperial markings. Extension legs can be removed for compact transportation. The extension is composed primarily of extruded aluminum and weighs 18 pounds. Extensions attach to the Kapex's crown stops (494369), sold separately. Save by purchasing the left and right extensions as a set (P00107). Includes right side extension only.

Festool T 12+3 Li-Ion 2.6 Ah Cordless Drill/Driver

February 5th, 2013

From the tool manufacturer who pays attention to the details, Festool introduces their new Lithium-Ion drill / drivers. Certainly they are not the first to market with Lithium-Ion technology, but they have done it right. Not only do you get the benefits of the lighter weight of the Lithium-Ion batteries coupled with more power and longer run times, but they have gone the extra step to include an indicator system that beeps when the battery is getting low, when the drill is getting overloaded, and when you have reached your desired torque setting. If thats not enough, these drills are backward compatible so you can use your old batteries and the drills know whether you are using your Lithium-Ion (new) battery or your Nickel (old) batteries. How smart is that? They have even figured out a way to preserve your favorite clutch settings, by providing an independent switch from drilling to driving mode, so you dont have to keep re-setting them. Fully electronic with sensors that disengage the motor when the desired torque setting is reached. They have kept the brushless motor technology for longer run time between servicing of the motor, which is also thermal overload protected. Drill, batteries, and charger carry a three-year warranty. Set comes with T 12 Drill, Lithium Ion Charger, two batteries, Centrotec Starter Set, Systainer.

Festool 488016 HS 60/1.2 bi Jigsaw Blade 2 3/8 Inch, 21 TPI , 25-pack

January 30th, 2013

The HS 60/1.2bi jigsaw blade is a longlife, bimetal blade for fine cuts in non-ferrous metals, aluminum, iron, sheet steel, extrusions, etc. The precision milled teeth of this corrugated blade are extremely tough and last a long time, even in hard to cut materials. An excellent blade for all non-wood materials for very fine cuts up to 1 3/16 inches. Festool T-shank jigsaw blades are engineered and designed for cutting efficiency, long life, and superior cutting results. The T-shank design is universal and fits most professional jigsaws. Festool has the right blade for various applications and types of material, making sure the perfect result can be achieved. In order to select the right jigsaw blade for your application, think first about the type of material you want to cut, since there are blades available for wood, plastics, non-ferrous metals, steel, and special materials like fiberglass, foam, and other materials. Next decide what kind of cut you need: fine, fast, scroll, clean. This will help to decide which blade is right for you. All Festool jigsaw blades are Made in Germany from high-quality materials for professional use and the best possible cutting results.

Festool 564261 CXS Li Compact Drill Driver Plus

January 29th, 2013

Festools newest addition to their cordless lineup, the CXS Compact Drill Driver, will conquer all your day-to-day drilling and driving challenges with comfort. Tight spaces, dark spots, and corners are no match for the CXS Drill Driver. Designed to be ultra-compact and engineered for big performance, the CXS is easily the most versatile compact drill/driver available. At less than 2 lbs., the CXS proves that small can be mighty. Festools CXS cordless drill packs more features, technology and ingenuity than any other cordless drill, but it doesnt stop there! The magnetic driver bit stowage, integrated belt clip, battery fuel gauge, and an ultra-bright LED light add to the functionality. Includes: CXS Drill Driver, Two 10.8V – 1.3 Ah Lithium Ion Batteries, Charger, Belt Hook, Centrotec Chuck, and SYS 1 T-LOC Systainer

Festool 488015 S 105/4 FSG TRION Jigsaw Blade, 4 1/8 Inch, 6 TPI, 20-Pack

January 28th, 2013

The S105/4 FSG jigsaw blade is the golden strandard of jigsaw blades. This jigsaw blade is thicker than any other jigsaw blade available on the market. The benefit? Perpendicular cuts can be made even in thick and hard to cut materials. Combined with a Festool jigsaw, the S105/4 FSG blade can make perpendicular cuts in materials up to 3 3/8 inches. The cross-set teeth design is perfect for very fast cuts in tough materials. Thicker than any other jigsaw blade, the S145/4 FSG TRION is the standard by which other blades are measured. When combined with the Festool jigsaw, the S145/4 FSG TRION is capable of making perpendicular cuts in hard to cut materials up to 4 3/4 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the right blade for any application or type of material, ensuring precise and consistent results. In order to select the right jigsaw blade for your application, think first about the type of material you want to cut, since there are blades available for wood, plastics, non-ferrous metals, steel, and special materials like fiberglass, foam, and other materials. Next decide what kind of cut you need: fine, fast, scroll, clean. This will help to decide which blade is right for you. All Festool jigsaw blades are made in Germany from high-quality materials for the best possible cutting results. Pack of 20 jigsaw blades.

Festool 564274 CXS Compact Drill Driver Set With Right Angle Chuck

January 24th, 2013

Festools newest addition to their cordless lineup, the CXS Compact Drill Driver, will conquer all your day-to-day drilling and driving challenges with comfort. Tight spaces, dark spots, and corners are no match for the CXS Drill Driver. Designed to be ultra-compact and engineered for big performance, the CXS is easily the most versatile compact drill/driver available. At less than 2 lbs., the CXS proves that small can be mighty. Festools CXS cordless drill packs more features, technology and ingenuity than any other cordless drill, but it doesnt stop there! The magnetic driver bit stowage, integrated belt clip, battery fuel gauge, and an ultra-bright LED light add to the functionality. Includes: CXS Drill Driver, Two 10.8V – 1.3 Ah Lithium Ion Batteries, Charger, Belt Hook, Centrotec Chuck, Right Angle Chuck, 1/32" – 5/16" Keyless Chuck, SYS 1 T-LOC Systainer

Festool M0122 35-Piece Jigsaw Blade Assortment

January 24th, 2013

Includes (5) 2-in 18 TPI Fine Scroll Blades – 485564, (5) 3-in 10 TPI Fine General Purpose Blades – 485548, (5) 3-in 6/7 TPI Fast and Clean Cut Blades – 486546, (5) 3-in 6/7 TPI Fast and Scrolling Blades – 486563, (5) 3-in 6/7 TPI Fast and Perpendicular Blades – 486551, (5) 4-1/8-in 6/7 TPI Fast and Perpendicular Blades – 486552, (5) 2-3/8-in 21 TPI Fine and General Purpose (Non-Ferrous Metal) Blades – 486556

RSS Feed

Search