Wood Lathe Copier Duplicator Device Copying Duplicating

February 20th, 2014

14″ x 40″ Power Wood Turning Lathe 1/2 HP 4 Speed Power

January 17th, 2014

*****Construction: Headstock, tailstock, foot, tool rest base, and tool rests are of heavy cast iron. Bed is made of heavy steel tubing. *****Headstock: The drive spindle is a No. 1 Morse taper, threaded 3/4" 16. The out bork end of the drive spindle can also be used for large turning and is threaded 3/4", 16, left hand. *****Tailstock: Slides along full length of the bed and clamps into position at any distance from the drive spindle. The ram has a hand wheel advance of 2 3/8" with positive lock and is fitted with a No. 1 Morse taper.

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14×40 In

November 11th, 2013

Construction – Headstock, tailstock, foot, tool rest base, and tool rests are of heavy cast iron. Bed is made of heavy steel tubing. Headstock – The drive spindle is a No. 1 Morse taper, threaded 3/4" 16. The out bork end of the drive spindle can also be used for large turning and is threaded 3/4", 16, left hand. Tailstock – Slides along full length of the bed and clamps into position at any distance from the drive spindle. The ram has a hand wheel advance of 2 3/8" with positive lock and is fitted with a No. 1 Morse taper.

8 piece Wood Lathe Chisel Tool Set

October 29th, 2013

Set of Eight (8) Wood Lathe Chisels. These high grade professional quality chisels are perfect for carving and cutting wood on the Lathe. Chisels are 14"-Long for maximum control. 1" Skew, 1/2" Skew, 1/2" Spear point, 1/8" Parting Tool, 1/2" Round Nose, 1/4" Gouge, 1/2" Gouge, 3/4" Gouge

7 X 12 Mini Metal Lathe

October 2nd, 2013

7×12 Precision Mini Variable Metal Lathe 2500RPM 400W

September 21st, 2013

Other features include: -Spindle Bore: 0.79" or 20mm.~ -Cross Side Travel: 2.56" or 65mm.~ -Top Side Travel: 1.38" or 35mm.~ -Range Of Imperial Threads: 12-52T.P.I.~ -Spindle Accuracy: 0.0004" or 0.01mm.~ -Spindle Speed: 0-2500RPM Infinitely Variable.~ -Power of Motor: 400W Single Phase.~ -Vol./Freq: 120V/60Hz.~ -Lathe Color May Vary: Orange or Blue .

Universal Tool Stand Grinder Lathe Mitre Scroll Saw

February 3rd, 2013

RSS Feed

Search