Incra LS25SYS 25″ Range Positioner with Pro-II Joinery Fence System

April 24th, 2013

Incra LS17SYS 17″ Range Positioner with Pro-II Joinery Fence System

April 11th, 2013

The world's most versatile and accurate movable fence for your router table, drill press, or band saw. Designed to meet the needs of the most serious woodworker yet easy enough for even a beginner to use. The NEW INCRA LS Positioner has all of the precision and versatility of our other tools, plus a host of new features and design details that set it apart from anything else. The LS stands for Lead Screw. Our patented Lead Screw technology (U.S. Patent #5,716,045) makes this unit the leader in precision positioners for woodworking. Included in the LS Positioner System Package: INCRA LS Positioner, 17" carriage, 28" Pro II Fence, INCRA Shop Stop, 13" Telescoping Stop Extender Bar with Shop Stop, Right Angle Fixture, Master Reference Guide, 51-piece Template Library, 82-Minute Instructional LS Positioner DVD, Plus FREE Bonus INCRA Products Demo DVD.

INCRA TSRT3221L 32-Inch by 21-Inch TS Router Table for Left Side of Blade, Fits Castings 30-Inch ? 31-Inch Deep

April 5th, 2013

The 32-Inch x 21-Inch Left-side router table permits maximum fence system range and offers open access from the end of the table saw by sliding the INCRA positioner assembly down the rails. This table is sized for saws with oversize cast iron tops measuring 30-Inch – 31-Inch deep along the miter slot. All Incra Router Tables are shipped with a 3/8-Inch solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1-Inch , 2-1/8-Inch and 3-5/8-Inch opening. Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess. All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the TS System's rail length and are vertically adjustable. The support kit is also available separately to support user made tables. The optional TS Leg set is a good choice for providing extra support at your table saw. Just slide the mounting brackets into the Incra Table Saw Fence System's T-slotted rails. The legs are horizontally adjustable to fit any table saw depth. The manufacturer offers 9 MagnaLOCK Mounting Plates pre-drilled to fit 34 different routers and 1 undrilled plate that the customer can drill to fit most other routers. To avoid possible -Inch mix and match-Inch confusion, the manufacturer includes a toll-free number and instructions inside each Router Table Box for the customer to call and receive personalized assistance in selecting the correct MagnaLOCK Mounting Plate for their router model. The selected plate is then shipped within 24 hours to the customer at no charge.

INCRA TSRT2832R 28-Inch by 32-Inch TS Router Table Top for Right Side of Blade, Fits Castings 27-Inch ? 28-Inch Deep

March 18th, 2013

The 28-Inch x 32-Inch Right hand table serves double duty as a table board and includes a full size 3/8-Inch x 3/4-Inch T-Slot miter channel. These tops are designed to support even the heaviest of production routers and lifts, and will work with any standard 9-1/4-Inch x 11-3/4-Inch mounting plate. All Incra Router Tables are shipped with a 3/8-Inch solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1-Inch , 2-1/8-Inch and 3-5/8-Inch opening. Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess. All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the TS System's rail length and are vertically adjustable. The support kit is also available separately to support user made tables. The optional TS Leg set is a good choice for providing extra support at your table saw. Just slide the mounting brackets into the Incra Table Saw Fence System's T-slotted rails. The legs are horizontally adjustable to fit any table saw depth. The manufacturer offers 9 MagnaLOCK Mounting Plates pre-drilled to fit 34 different routers and 1 undrilled plate that the customer can drill to fit most other routers. To avoid possible -Inch mix and match-Inch confusion, the manufacturer includes a toll-free number and instructions inside each Router Table Box for the customer to call and receive personalized assistance in selecting the correct MagnaLOCK Mounting Plate for their router model. The selected plate is then shipped within 24 hours to the customer at no charge.

Incra LS17WFNCSYS 17-Inch Range LS Super System For Router Tables, Band Saws & Drill Presses

March 1st, 2013

The world's most versatile and accurate movable fence for your router table, drill press, or band saw, gets even more useful in the LS17WFNCSYS system which includes the leading split fence design, the Wonder Fence. Designed to meet the needs of the most serious woodworker yet easy enough for even a beginner to use. The new Incra LS Super System has all of the precision and versatility of our other tools, plus a host of new features and design details that set it apart from anything else.This sytem is the ultimate in precision fence systems for serious joinery and woodworking fans. The LS stands for Lead Screw. Incra's patented Lead Screw technology (U.S. Patent #5,716,045) makes this unit the leader in precision positioners for woodworking.

INCRA TSRT3232R 32-Inch by 32-Inch TS Router Table for Right Side of Blade, Fits Castings 30-Inch ? 31-Inch Deep

February 14th, 2013

The 32-Inch x 32-Inch Right-side router table serves double duty as a work surface extension and includes a full size 3/8-Inch x 3/4-Inch T-Slot Miter channel. This table is sized for saws with oversize cast iron tops measuring 30-Inch – 31-Inch deep along the miter slot. All Incra Router Tables are shipped with a 3/8-Inch solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System. Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1-Inch , 2-1/8-Inch and 3-5/8-Inch opening. Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess. All table saw based router tables include the TS Router Table Support Kit with 4 brackets and 2 table stiffeners. The brackets can be positioned anywhere along the TS System's rail length and are vertically adjustable. The support kit is also available separately to support user made tables. The optional TS Leg set is a good choice for providing extra support at your table saw. Just slide the mounting brackets into the Incra Table Saw Fence System's T-slotted rails. The legs are horizontally adjustable to fit any table saw depth. The manufacturer offers 9 MagnaLOCK Mounting Plates pre-drilled to fit 34 different routers and 1 undrilled plate that the customer can drill to fit most other routers. To avoid possible -Inch mix and match-Inch confusion, the manufacturer includes a toll-free number and instructions inside each Router Table Box for the customer to call and receive personalized assistance in selecting the correct MagnaLOCK Mounting Plate for their router model. The selected plate is then shipped within 24 hours to the customer at no charge.

INCRA LS32-TS TS-LS Table Saw Fence 32-Inch Range

February 8th, 2013

The new INCRA LS32-TS offers the one thing that every table saw fence should have that none does – namely, Automatic Positioning Control. All other table saws doepend on a tape measure and your eyesight to position your work. That's why all table saw users are resigned to the fact that a good cut requires long set-up times and endless trial and error. The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA'S patented lead screw technology to position your work instantly and automatically to within 0.002".Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability.

Incra ULTRALITESYS Ultra Lite Jig Woodworking System

February 7th, 2013

The Incra Ultra Lite Jig Woodworking System delivers 12-1/2 inches of positioning range, helping you with most of your router table applications. With micro adjustability of 0.001 inches, the Incra Jig Ultra is the most precise jig on the market for router tables, drill presses or bandsaws. The three-point self-lubricating and self-cleaning linear bearing system ensures extremely smooth tracking, and advances in precise 1/32-inch increments allow you to zero in and cut without measuring. The woodworking system comes with complete joint making instructions, and fixtures and jigs for every joint application. Simply change setup for a new operation then return to original cut with virtually no error.
The Incra Jig Ultra Lite packs the best features of its big brother, the Incra Jig Ultra, into a more compact unit with a 12-1/2-inch positioning range. The ultra woodworking system comes with a lifetime Incra warranty on racks, and a limited 1-year warranty on other parts.

INCRA IJ32FNCSYS Original Jig Fence System with MDF Fence and Shop Stop plus Aluminum Right Angle Fixture

January 31st, 2013

Combine the original INCRA Jig 32 positioner with the INCRA Jig 32 fence system (sold separately) to produce box joints, dovetails and much more.

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

January 31st, 2013

Capitalizing on a great idea, the folks a INCRA® have combined their highly successful Miter3000® with the exclusive AngleLOCK® Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one solid unit for precision cross-cutting at any angle. The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by means of a miter slider and functions as a zero clearance cut-off table that's perfectly aligned with the main sled. Since this system includes precision angle adjustment, stop positioner and clamping sled for superior workpiece control, all possibility for cutting error has been eliminated and each cut is predictable and precise. Finally, a perfect cross-cutting system for your table saw! Order the replacement Panel for maintaining zero clearance for different blades and compound angle cutting. Please see above for Miter3000® specifications.

RSS Feed

Search