Kreg KMA2600 Square-Cut

January 1st, 2014

KREG Square-Cut is the fastest and easiest way for anyone to achieve perfect square cuts and consistent lengths. Guide arm adjusts to exact distance from edge of saw base to inside edge of saw blade Works with material up to 12 wide such as siding and decking Roof pitch layout feature is handy for siding, fascia and rafter work on the jobsite. No-slip rubber feet and a little gentle pressure hold the Square-Cut firmly in place. Made of durable, impact resistant plastic Perfect for any brand of circular saw or jig saw.

Kreg KMA2675 Kreg Rip-Cut

November 15th, 2013

Ripping down large panels into smaller more manageable workpieces is one of the trickiest, most intimidating, and expensive steps of any wood project. Even if you're ripping with the nicest table saw, you're still forced to lift large heavy panels, balance them carefully to avoid binding and bowing, while at the same time trying to support the finished workpieces and waste material as they exit the saw. There is a faster way. There is an easier way! There is a better way. Introducing the all-new Kreg Rip-Cut. The Rip-Cut is an incredibly handy tool which speeds and simplifies the process of ripping down large plywood and MDF panels. No measuring, no marking, no chalk lines-the Rip-Cut quickly and easily attaches to almost any circular saw, letting you cut pieces from 1/8-Inch up to 24-Inch wide with tremendous accuracy. The Rip-Cut is a no-nonsense, straight forward, accessory for your circular saw. It features a durable design including a solid aluminum guide rail, an easy-to-read adjustable scale, and a reversible guide arm which works whether you're left or right handed and whether your blade is on the left or right side of the saw. It's an incredibly easy, precise, and affordable way to break down large panels for almost any project.

Kreg Jig PRS2000 Precision Router Table & Triton 2HP Router Combo! Save!

February 19th, 2013

Kreg Model PRS2000 Precision Portable Router Table with Steel stand and the Triton 2.0 Plunge Router designed for Router table!

KREG Precision Router Table Fence 36″

February 16th, 2013

Rugged, aluminium fence for precision and rigidity. Self-squaring, T-square style design. Mounts to tables between 19 x 12.7mm (3/4" and 1 1/2") thick. Features enclosed aluminium extrusion, full-length vacuum chamber, precision lens cursor, and independent fence faces for use as a vertical jointer. Compatible with Kreg Precision Micro-Adjuster.

KREG KJD/DECKBIT Deck Jig Drill Bit, Depth Collar and Allen Wrench

February 13th, 2013

Special stepped drill bit rides in the hardened steel drill guide of the deck jig to drill pilot holes at the precise, optimal angle.

KREG Precision Benchtop Router Table 406mm (16″)

February 13th, 2013

Rugged table with stamped steel foundation, 4 rubber feet, edgebanded reinforced table top with impact-resistant micro-dot surface, and rigid aluminium fence. Unique bottom-up levellers feature 8 contact points for levelling accuracy. Independent fence faces allow table to double as a vertical jointer. Size: 406 x 610mm (16" x 24").

Kreg Tool Company KMA3210 1/4-Inch Kreg Shelf Pin Jig Drill Bit

February 13th, 2013

1/4-Inch Drill Bit used with the Kreg Shelf-Pin Jig. Used to drill holes in an existing piece of furniture or building shelves from scratch. Shelf-Pin Jig sold separately.

Kreg NZ03-B Drawer Mounting Brackets

February 12th, 2013

For both face frame and faceless cabinets, aligning the drawer box to full extension slides is simple with our drawer mounting brackets. Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, then pull the slide to the front of the box and drive your screws. The 12'' brackets work with most common drawer sizes, and the 1/8'' tabs on the front of the bracket are designed to fit under mounted full extension slides for perfect placement every time. Made of rugged, shock resistant plastic for years of service, these brackets are a great addition to your workshop and toolbox.

Kreg Jig Dust Collection Attachment

February 11th, 2013

Keep a clean shop. Connect any standard 1-1/4" vacuum hose to your Kreg jig for faster drill strokes and a cleaner shop. Works only with Kreg Jig K3 and K4.

Kreg Tool Company KTC5750 Toolboxx Master Collection

February 6th, 2013

For customers that want all things Kreg Joinery and have one handy place to store it, the Kreg Toolboxx Master Collection gives them everything they want. Kreg Toolboxx Master Collection includes the following, . K3 Kreg Jig. Face Clamp. Portable Base. Dust Collection. Kreg Jig Support Stop. Kreg Jig Mini. Kreg Jig HD. Kreg Jig HD Screws – 30 ct. Micro-Pocket Drill Guide. Right Angle Clamp. Screw Selector Wheel. Trim Carpentry DVD. 1000+ Kreg Screws.

RSS Feed

Search