Laguna Tools 18/47 Lathe

February 8th, 2014

The New Laguna Tools Platinum Series 18/47 lathe was specifically designed for woodturners by woodturners with capacities designed to match the needs of turning enthusiasts. The 18/47 features plenty of cast iron in the bed and legs to dampen vibration while turning. The legs have cast-in gussets allowing you to add a shelf for storage or additional weight. The headstock slides easily the entire length of the bed to allow you to position for turning near or off the end of the bed, perfect for hollow forms or platters. Standard electronic variable speed with digital readout allows you to adjust the speed with a knob while the 2-step pulley and poly-groove belt allow you to keep in the correct torque range for nearly any application. Lathe operates on single phase 220 volt while the motor is a three phase motor with constant torque monitoring. Speed control can be used in forward or reverse to make sanding a breeze. Standard equipment includes spur drive center, live center, knock-out bar, index lock, face plate, handwheel, and long tool rest.
Motor: 2.0 hp Variable Speed: yes Spindle Speed Range – Low: 0 – 1200 rpm High: 0 – 3200 rpm Swing Over Bed: 18" Distance Between Centers: 47" Headstock & Tailstock Taper: MT#2 Overall Length: (includes motor at max.) 74" Bed Length: 66.5" Spindle Height: 45" Tailstock Travel: 4 1/4 " Face Plate 6" Spindle Thread: 1.25" x 8 TPI Voltage: 220 volts Headstock/Tailstock Bore: 3/8" Indexing Position: 36 Packing Size: 68" x 22" x23" Weight: 500 lbs.

Laguna Tools CL1200 Lathe

September 9th, 2013

The Laguna CL1200 lathe was designed especially for the custom wood workers with the capability of accomplishing projects for both big and small shops. With 46" between centers (can be ordered in custom length), this lathe is an indexing lathe, one pass copy lathe and a bowl turning lathe. Equipped with 2-hp motor this lathe has four speeds with optional electronic variable speed. Heavy-duty solid steel and cast-iron construction for precision and stability, the CL1200 weights in at 800 pounds.
Max Distance Between Centers: 46" Max Copying Length: 40" Max Depth of Copying: 2.5" Morse Taper Centers: MK2 Thread Size: 33mm x 3.5 Speeds: 500 / 1,000 / 2,000 / 3,000 Motor: 2 hp Opitional: Electronic variable speed Size Setup w/ Copier 84" x 33" x 49" Weight: 800 lbs.

Laguna Tools 12″ Jointer / Planer Combination w/ SCH

January 27th, 2013

Our line of Platinum Series Jointer/Planer combination machines has now grown to include 3 sizes to suit any application. These Euro-style combo machines make good use of the space in your shop. Our 10 model is perfect for hobbyists and small shops that are tight on space. The 12 version provides extra muscle and capacity with wider, longer tables and more horsepower. The 16 version also has a matched jointer and planer with a tight footprint. Each of these machines features the Laguna Shear-Tec cutterhead for flawless cuts and easy knife changes. An optional mortiser is available as an accessory on each machine to make perfect joints. Cast-iron construction from the cutterhead all the way to the table hinges insures a smooth, stable, and accurate cut.
Motor: 3 hp Jointer Table Size: 12" x 63 Planer Table Size: 12" x 30 " Cutterhead Diameter: 3 3/4" Feed Roller Diameter: 1 1/2" Shear-Tec Spiral Cutters Fence Tilt: 0 to 45 degree Dust Chute Diameter: 4" Maximum Joining Width: 12" Maximum Planing Width: 12" Maximum Cuttin Depth: 3/16" Maximum Planing Height: 8 1/2 " Cutterhead Speed: 4,800 rpm Feed Speed: 26 ft/min Packing Size: 66" x 25" x 36" Net/Gross Weight: 760/849 lbs.

Laguna Tools 12″ Jointer / Planer Combination

January 26th, 2013

Our line of Platinum Series Jointer/Planer combination machines has now grown to include 3 sizes to suit any application. These Euro-style combo machines make good use of the space in your shop. Our 10 model is perfect for hobbyists and small shops that are tight on space. The 12 version provides extra muscle and capacity with wider, longer tables and more horsepower. The 16 version also has a matched jointer and planer with a tight footprint. Each of these machines features the Laguna Shear-Tec cutterhead for flawless cuts and easy knife changes. An optional mortiser is available as an accessory on each machine to make perfect joints. Cast-iron construction from the cutterhead all the way to the table hinges insures a smooth, stable, and accurate cut.
Motor: 3 hp Jointer Table Size: 12" x 63 Planer Table Size: 12" x 30 " Cutterhead Diameter: 3 3/4" Feed Roller Diameter: 1 1/2" Cutting Knives: 4 Fence Tilt: 0 to 45 degree Dust Chute Diameter: 4" Maximum Joining Width: 12" Maximum Planing Width: 12" Maximum Cuttin Depth: 3/16" Maximum Planing Height: 8 1/2 " Cutterhead Speed: 4,800 rpm Feed Speed: 26 ft/min Packing Size: 66" x 25" x 36" Net/Gross Weight: 760/849 lbs.

Laguna Tools 10″ 5 Function Combo Machine w/ SCH

January 26th, 2013

The Platinum Series 10" 5 Function Combination Machine is a perfect all in one machine for a small shop. Its very limited foot print allows for very little room to operate, but has the capacity to handle even large projects. The 3-HP sliding tablesaw with scoring has a crosscut capacity of 54'. The shaper has a 3-HP motor with a micro-adjustable easy install fence that is made of cast-iron and comes with a 4' dust port. Mortising is a snap on the horizontal mortiser that is attached to the 2-HP 10" jointer which also coverts into a planer in less than 30 seconds. Jointer/Planer is equpped with Shear-Tec Spiral Cutter Head. Tackle your projects with the power of 5 machines built into one. The intelligent 1 man shop!
Jointer/Planer Maximum Planer: 10" Motor: 2 hp Cutting knife: Spiral (Shear-Tec) Maximum Thickness: 7" Tablesaw Motor for Main Blade: 3 hp Main Blade Size: 10" Scoring Blade Size: 3 1/2" Cutting Height for Blade: 2 1/4" Blade Tilt: 45 – 90 Table Size: 1,200 x 840 (1080) Shaper Shaper Motor: 3 hp Spindle Speed: 2,000/4,000/6,000 rpm Maximum Cutter Diameter: 6" Mortiser 3 Axis Mortiser Weight: 1000 lbs.

Laguna Tools 16″ Jointer / Planer Combination w/ SCH

January 26th, 2013

Our line of Platinum Series Jointer/Planer combination machines has now grown to include 3 sizes to suit any application. These Euro-style combination machines make good use of the space in your shop. Our 10" model is perfect for hobbyists and small shops that are tight on space. The 12" version provides extra muscle and capacity with wider, longer tables and more horsepower. The 16" version also has a matched jointer and planer with a tight footprint. Each of these machines can be purchased with the Laguna Shear-Tec cutterhead for flawless cuts and easy knife changes or a standard straight knife blade system. An optional mortiser is available as an accessory on each machine to make perfect joints. Cast-iron and heavy steel from the cutterhead all the way to the table hinges insures a smooth, stable, and accurate cut.
Motor: 4 HP Jointer Table Size: 16" x 63" Planer Table Size: 16" x 30" Feed Roller Diameter: 1 1/2" Cutterhead: Shear-Tec Number of knives: 105 Fence Size: 44" x 5.25" Fence Tilt: 90 – 45ยบ Dust Chute Diameter: 4" Maximum Joining Width: 16" Maximum Planing Width: 16" Maximum Cutting Depth: 1/4" Maximum Planing Height: 9" Cutterhead Speed: 4,800 rpm Volts: 220 Feed Speed: 26

Laguna Tools 10″ Jointer / Planer Combination

January 25th, 2013

Our line of Platinum Series Jointer/Planer combination machines has now grown to include 3 sizes to suit any application. These Euro-style combo machines make good use of the space in your shop. Our 10 model is perfect for hobbyists and small shops that are tight on space. The 12 version provides extra muscle and capacity with wider, longer tables and more horsepower. The 16 version also has a matched jointer and planer with a tight footprint. Each of these machines features the Laguna Shear-Tec cutterhead for flawless cuts and easy knife changes. An optional mortiser is available as an accessory on each machine to make perfect joints. Cast-iron construction from the cutterhead all the way to the table hinges insures a smooth, stable, and accurate cut.
Motor: 2 hp Jointer Table Size: 10" x 42" Planer Table Size: 10" x 24" Cutterhead Diameter: 3" Feed Roller Diameter: 1 1/2" Cutting Knives: 3 Fence Tilt: 0 to 45 degree Dust Chute Diameter: 4" Maximum Joining Width: 10" Maximum Cutting Depth: 1/8" Maximum Planing Height: 7" Cutterhead Speed: 4,800 rpm Feed Speed: 26 ft/min Packing Size: 45" x 22" x 36" Weight: 436 lbs.

RSS Feed

Search