Proxxon 27024 4-Jaw Chuck for Micro Wood Turning Lathe DB 250

January 4th, 2014

27024 Features: -Four jaw chuck.-Used to clamp asymmetrical pieces such as rectangles.-Jaws clamp from 0 to 1.75" inside and 0.54" to 2.62" outside.-Screws on directly to headstock spindle of Micro Woodturning Lathe DB 250. Dimensions: -Overall dimensions: 1.81" H x 3.93" W x 3.42" D, 0.2 lbs.

Proxxon 38530 Super Jig Saw STS/E

October 9th, 2013

This tool offers fantastic cutting capacity with the base plate adjustable up to 45° for miter cuts. The slim and stable gear head is made of die-cast zinc for exact bearing seats. Main housing made of fibreglass reinforced POLYAMIDE. Special, balanced, low noise DC motor with high life expectancy. With full-wave electronics for speeds continuously variable from 2,000 to 4,500 rpm. Ideal for tight curves in wood up to 1", circuit boards up to 3/16", non-ferrous metals up to 1/8" and plastics. Complete with 4 Supercut saw blades of different tooth pitches for wood, plastics and metal. Technical data: 110 – 120V. Max. power 1/8 hp. Speed 2,000 – 4,500 rpm. Length 8". Weight 1.5lb The Super Jig Saw SS 115/E is supplied in a high-quality PP storage case. It has a strong frame, is extremely stable and large enough to repack in the case without "fiddling around". With lateral sticker for identification of the content.Jig saw blades. Special steel Tooth pitch of 3/64" With teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as various plastics. Ideal for tight curves and clean cuts.

Proxxon 37050 Micro Shaper MT 300

March 3rd, 2013

The perfect size machine for all kinds of applications, where precision is needed: delicate, detailed and precise edge forming, profiling, grooving, chamfering, routing and trimming on wooden and plastic work pieces. Optimal for picture framing, cabinetry, classic model building applications (model railroads, model airplanes, doll houses), and much more. The MT 300 convinces with its powerful performance through a dust-protected motor and belt drive. The material slides smoothly overe the machined extrusion molded aluminum worktable. Cutters are fitted via triple slit high-concentricity steel collets (three collets in sizes 3/32", 7/64" and 1/8" (2.4 – 3.0 and 3.2 mm) are included). Bits are easily mounted and removed using two wrenches supplied with the machine and stored in a built-in wrench-storage. The height of the bit is conveniently adjustable via a hand wheel with zero-adjustable dials (travel: 1 3/16" (30 mm), 1 revolution = 3/64" (1 mm), 1 division = 0,002" (0.05 mm). Technical Data: 115 V, 60 Hz, 1/8 hp (100 W), 30,000 rpm. Table size: 11 1/2" x 6" (293 mm x 150 mm). Weight: 4.4 lb (2.0 kg). Double insulated.

Proxxon 37088 DS 115/E Scroll Saw

February 13th, 2013

This is the ideal machine for that delicate project: model building, toy manufacturing and precision work. It cuts soft wood (e.g. bass wood) up to 1 3/16" (30 mm), hard wood up to approx. 25/64" (10 mm), plastic (including circuit boards) up to approx. 5/32" (4 mm) and non-ferrous metals up to 5/64" (2 mm) with standard scroll saw blades. The machine has a very stable ribbed die-cast aluminum saw frame with 11 13/16" (300 mm) throat. The blade guide is equipped with an integrated blower. The patented head-part is height-adjustable in 3 positions and offers numerous advantages: The lifetime of the saw blade is tripled after shortening it twice (teeth in the middle part of the saw blade are finally used, too). With the head in the lowest position, working with a blade shortened to 2 23/64" is even more precise. The machined worktable of die-cast aluminum has a size of 6 19/64" x 6 19/64" (160 x 160 mm) and is equipped with an adjustable longitudinal stop and graduated miter gauge (0-90°). The ABS plastic body provides a very practical sliding door on the right side of the housing for the removal of saw dust. The saw is powered by a 110 – 120V motor (85 W) for prolonged use, low noise performance and even supported by a quiet and wear-resistant toothed belt drive, running in a ball bearing assembly. The machine offers an electronically controllable stroke rate from approx. 150 – 2,500 strokes/min.

Proxxon 38526 BBS Belt Sander

February 13th, 2013

With powerful special DC motor, quiet and long-lasting. The sanding belt is located flush on the left side to allow surfaces to be sanded "right down to the corner". Fine adjustment for the rollers prevents running off on the side. Spring clamping system for easy replacement of belts without tool. Housing made of fibreglass reinforced POLYAMIDE. Complete with screw clamp and 5 each 120 grit and 240 grit sanding belts. Technical data:110 – 120 V. 1/5 hp (150 W). Sanding belt 1 37/64" x 10 7/16" (40 x 265 mm). Sanding surface 2 23/64" x 1 37/64" (60 x 40 mm). Belt speed 525 ft/min (160 m/min). Weight 1.5lb (700 g).

Proxxon 28054 and 28056 Jig Saw Blades

February 9th, 2013

Proxxon jig saw blade set consisting of 2 each 3/16-Inch (1.06mm) teeth ground and set. Usable on hard and soft woods, plywood, fiberglass reinforced sheets and various plastics for tight curves and clean cuts. 2 each tooth pitch of 1/16-Inch (1.5mm) with teeth set and ground. Usable on metals, aluminum and softer alloys, fiberglass, Plexiglas and insulating materials. For use with proxxon jig saw SS15/E number 38350.Proxxon german engineering for professional resultsSpecial steel, 2-piece and jig saw blades, HSS 2-piece

Proxxon 38635 Complete Engraving Kit with Trial Glass

February 7th, 2013

The kit comes with the tried and tested high speed engraving tool GG 12 (12-18V, 20,000 rpm, fitted in a ball bearing assembly) powered by the included AC adapter (12V, 0.5A), patterns and instruction booklet as well as all necessary bits: 1 each 1/32" and 5/64" (1.0 and 1.8 mm) diamond grinding bits with spherical head for engraving and line work as well as 1 each silicon carbide grinding bits in both conical and bullet shape for frosting glass. Carve and engrave the finest details in metal, wood, plastic and glass. For more details on the tool see Engraving Tool GG 12 – 28592. Note: The unit requires a 12 V power source. Please see our AC Adapters NG 2/S and NG 5/E for details. Proxxon tools come with a 2 year factory warranty.

Proxxon 37070 FET Table Saw

February 4th, 2013

Perfectly straight cuts. For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters. For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and many other materials. Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium. The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 0.004" (1/10mm) can be made after coarse adjustment using an adjusting screw. The height is adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with the angle stop. Low-noise drive using DC special motor with compound belt driver. Ball-bearinged saw blade shaft. Tungsten tipped saw blade Ø 3 9/64" (80mm) x 1/16" (1.6mm) x 13/32" (10mm) (24 T). Additional work piece pusher and non-slotted ABS sawing gap cover for tight tolerances between saw blade and table. Technical data: 110 – 120V AC. 60Hz. 7,000rpm. Mitre infinitely adjustable up to 45°. Table size 12" x 12" (300 x 300mm). Cutting depth 0.04 – 5/6" (1 – 22mm). Saw blades between 2 – 3 11/32" (50 – 85mm) can be used (with 13/32" (10mm) centre hole). Weight approx. 12 lb (6kg).

Proxxon 28534 12-Volt Jig Saw STS 12/E

February 1st, 2013

Proxxon 28606 MICROMOT Drill Stand MB 140/ S

January 29th, 2013

Proxxon MICROMOT Drill Stand MB 140/S. All PROXXON MICROMOT hand-tools with the 3/4'' standard collar perfectly fit this drill stand. It provides the steadiness when needed and turns your rotary tool into a mini drill press, e.g. for drilling very fine holes. The drill stand even makes your rotary tool more versatile as it holds it horizontally, too, so that you can use it like a bench grinder. The drill stand keeps the tool lined up and allows you to control it easily with one hand. NOTE: Rotary Tool and Vice Clamp in picture not included. See details.4-3/4 inch by 8-11/16 inch table is milled and fitted with a fence and scaleSolid column is chrome plated and the headstock is of die cast aluminum for precision and corrosion resistant useChromed feed lever operates via drive disc and ball bearing system offering very sensitive feed set-up

RSS Feed

Search