PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck

January 13th, 2014

Introducing the breakthrough convenience of our new Dedicated Bowl Finishing Chuck. Save the time (10-15 minutes) and the inconvenience of swapping and installing Jumbo jaws on your Lathe Chuck every time you have to finish the bottom of a bowl. This dedicated chuck is a necessity for every bowl turner. The chuck includes a set of pre-installed jaws large enough to make an 8-1/2" bowl. The chuck features a key operated chuck body for quick and firm positioning, a chuck key, and 2 sets of grip pins. Pre-threaded for a 1" x 8tpi headstock. Will mount on other headstocks with the proper spindle thread adapters.

PSI Woodworking CSC600 Off Center Wood Lathe Chuck System

December 29th, 2013

The typical reaction to someone studying an off center turning is “How on Earth did you make that”? Off center turning enables you to make special turning effects on your projects that would be impossible without this PSI Off Center Chuck System. This multi-faceted chuck system is so versatile that we’re including an instructional DVD to explain all of its capeabilities. This chuck mounts your current lathe chuck (1” x 8TPI) to its body, and can be calibrated to make off center turning with 3, 4, or 6 sides. You will be amazed at the variations and configurations of turnings that this system can produce including multiple faceted sides and spiraling effects. Using this standard mounting chuck you can mount and turn off center turnings of spindles, bowls, candlesticks, cups and numerous other turning projects. In addition we’ve included turning mandrels for pens and bottle stoppers. These attachments also allow you to make 3, 4, and 6 sided pens and bottle stoppers.

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

December 18th, 2013

PSI developed the PSI Mini-Grip 3 as the ultimate mini-lathe chuck. This 4 jaw self-centering system provides everything you need in a mini-lathe chuck system. All PSI 'C' style chucks have jaws that are completely interchangeable with all other 'C' style PSI chucks.Basic Straight Jaws for 1-inch stock, square or roundBonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inchStepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inchAdapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close leversFlat jaws to handle bowls up to 5-inch diameter are available (#CJAWFJ1)

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

December 11th, 2013

Here is the Baracuda 3 full-featured and complete 4-jaw chuck system in a small package. It is ideal for cup projects, miniatures and small spindle work. Uses a single chuck key to tighten the jaws with one hand. Fits Midi, Mini, and Micro Lathes. Weighs only 1.2 pounds with a 2-1/8" outside diameter. Includes step jaws, round jaws, and pin jaws. Pre-threaded body to 1" x 8 tpi. Mounts to 3/4" x 16 tpi with the adapter included. Holds workpiece from 5/8" to 2" inside hole diameter, and holds dowells from 1/4" to 1-1/2" outside diameter.

PSI Woodworking LCPM3 3 Piece HSS Pen Turning Lathe Chisel Set

December 5th, 2013

Upgrade to this Benjamin's Best professional chisel set. High Speed Steel stays sharper longer and cuts faster. Chisels are 11-inches with 8-inch handles. Comes in an attractive wooden display box. 3/8-inch gouge for rough cutting,1/8-inch parting tool for cutting tenons, and parting-off. 1/2-inch oval skew for smooth cuts and finished surfaces.

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT

December 1st, 2013

4 piece Center Set contains hard to find replacement centers for wood lathes equipped with a #2 MT headstock and tailstock. Contains a 5/8" diameter headstock spur center for narrow spindles, a 1" diameter headstock spur center for standard spindles, a live ball bearing tailstock center with cup and point, and a hollow center for drilling 5/16-inch through holes (for lamps, etc.) Packaged in a wood storage box.

PSI Woodworking CJAWFJ1 Small Flat Lathe Chuck Jaws

November 30th, 2013

The Barracuda scroll lathe chuck from PSI Woodworking has jaws that open to accommodate a 5-inch bowl, and it's designed to allow you to finish bowls so it's ideal for turning bowl bottoms. The Barracuda is easy to adjust, with a three-position peg system. The small, flat jaws are compatible with all the PSI Woodworking 'C' style chucks.Scroll lathe chuck designed for finishing bowl bottomsJaws open to accommodate a 5-inch bowlEasy to adjust sizes with the 3-position peg systemCompatible with all the PSI Woodworking 'C' style chucksWeighs 2 pounds shipped

PSI CXC/4 Expanding Collet Lathe Chuck Fits 1-by-8 tpi Spindles

November 9th, 2013

PSI Woodworking DLHOODC2 Clear Wood Lathe Dust Hood With Magnetic Mounting Clamp

November 8th, 2013

This hood along with your D/C, eliminates nearly all of that fine turning dust that flies into your face and collects all over your lathe and stand. The 6" x 9" opening is ideal for spindle and small bowl turning. The hinged clear plastic face shield adjusts for optimal protection and dust collection, while allowing an unobstructed view of the workpiece. The included L bracket allows you to easily clamp the hood or you can use the magnetic plate to support the hood onto most lathes at any point along their cast iron bed. 4" fitting allows you to utilize standard collection hose or use an adapter to step down to your shop vac hose.

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

November 3rd, 2013

This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Pre cut with a 1" X 8 tpi standard thread mount, and includes an adapter for 3/4" x 16 tpi spindles. Weighs only 1.2 pounds. Holds a workpiece from 3/4" to 2-1/2" inside diameter, and a workpiece from zero to 1-1/4" outside diameter. Uses small levers to open and tighten the three jaws.

RSS Feed

Search