Wood Lathe Tailstock Center, MT2

April 4th, 2014

Precision ball bearings bring you the smoothest possible turning with greater speed capabilities, and no need to lubricate. Live centers also allow greater clamping pressures while still retaining their incredibly smooth rotation. This center is precision machined to a 60 degree point and includes a #2 morse taper. Also available for #1 morse taper. Technical Details: Live center (revolving center) features sealed ball bearings for smooth, maintenance-free operation. Precision machined to a 60 degree point. Includes #2 morse taper (permanently attached) What's in the Box? (1) Wood Lathe Tailstock Live Center, MT2

Table Saw Pop-In Splitter for Thin Kerf Blades

November 6th, 2013

Improve Table Saw Safety! This affordable splitter system is simple to use, exact and extremely effective. You'll get virtually burn-free cuts with very little effort. Includes two splitters with a total of four alignment surfaces, an installation jig, drill bit and instructions.

Designed to be used on a Zero Clearance Insert. Two models available: one for 1/8" kerf saw blades and another for Thin Kerf Blades. Use for making 90 degree cuts only. Will not accommodate cuts with a tilted arbor. Polycarbonate.

Diamond Carbide Mini Turning Tool

October 20th, 2013

This Diamond Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Technical Details:
Ideal for use as a parting tool, and for tight profiles.
Total overall length of Mini Turning Tool is approximately 13-1/2".
Length of the diamond cutter is 1-1/8", with an angle of about 35 degrees.
Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule.
Length of the shaft is approximately 4".
Ash handles feature a molded rubber end for a secure, effortless grip and excellent ergonomics.
Note: carbide cutters are not interchangeable between the different tools.
(more…)

Square Carbide Mini Turning Tool

October 15th, 2013

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Technical Details:
Ideal profile for flat or convex areas on spindles and pen turnings.
Diameter of square cutter is 3/8".
Total overall length of Mini Turning Tool is approximately 13-1/2''.
Ash handles are 9-1/2'' long from the butt of the handle to the top of the stainless steel ferrule.
Length of the shaft is approximately 4''.
Ash handles are coated with a soft, grippy rubber for a secure, effortless grip and excellent ergonomics.
Note: carbide cutters are not interchangeable between the different tools.
(more…)

Round Carbide Mini Turning Tool

October 14th, 2013

This Round Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Technical Details:
Ideal for giving you a smooth finish on curved, concave surfaces and for general turning applications.
Total overall length of Mini Turning Tool is approximately 13-1/2".
Diameter of the round cutter is just under 1/2".
Ash handles are 9-1/2" long from the butt of the handle to the top of the stainless steel ferrule.
Length of the shaft is approximately 4".
Ash handles feature molded rubber for a secure, effortless grip and excellent ergonomics.
Note: carbide cutters are not interchangeable between the different tools.
(more…)

Bench Dog Cast Iron Router Table for Table Saws (40-102), Group D Routers

March 28th, 2013

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific router. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds.

Select a package that includes a plate pre-drilled to mount your router,
which should fall into one of the four groups listed below.
(more…)

Bench Dog Cast Iron Router Table for Table Saws (40-102), Blank Plate, Large

March 11th, 2013

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit, and a solid aluminum insert plate that is pre-drilled to fit your specific router. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds.

Select a package that includes a plate pre-drilled to mount your router,
which should fall into one of the four groups listed below.
(more…)

Rockler High Pressure Laminate Router Table, Fence & Plate D

February 21st, 2013

Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and a flat CNC-machined router plate for better accuracy. Plus, they now include a dust port! New 3/4'' T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Table is built from our tried-and-true 1-1/8'' thick MDF core sandwiched between high pressure laminates, and features a brighter finish for better visibility. Aluminum fence features two adjustable white melamine MDF faces, front and top accessory T-tracks and an integrated bit guard. Technical Details: Includes Router Plate D which fits these routers: Bosch 1619-1619EV, Freud FT2000 & DeWalt 625. 8-1/4'' x 11-3/4'' x 1/4'' aluminum plate is CNC machined for incredible flatness and precision. Featuring 8-points of plate leveling and 2 locking points. 24'' x 32'' table for over five square feet of surface area. Ergonomic T-knobs for easy fence adjustment. Includes bit safety guard for safe routing. Extruded aluminum backer provides a stiff, straight backbone. Large opening in fence for big router bits. Aluminum fence backer features top-mounted universal T-track that accepts 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' Hex bolts. What's in the Box? (1) Rockler High Pressure Laminate Rockler Router Table (1) Rockler Router Table Fence (1) Rockler Router Plate D (1) Bit Guard (1) Dust Port

Rockler Pro Phenolic Router Table, Fence, Stand, & Standard Blank Plate

February 21st, 2013

Our brand-new pro tables feature one-piece 3/4'' solid phenolic construction for an ultra-flat, low-friction surface that won't warp, dent, scratch or delaminate. The whiter, brighter finish enhances visibility, while our new, flat CNC-machined router plates offer better precision and repeatability than ever before. 3/4'' T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence features two adjustable white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit guard. Technical Details: Includes the non-drilled blank Standard Router Plate: 3-1/4'' bit opening. 8-1/4'' x 11-3/4'' x 1/4'' aluminum plate is CNC machined for incredible flatness and precision. Featuring 8-points of plate leveling and 2 locking points. 24'' x 32'' table for over five square feet of surface area. Ergonomic T-knobs for easy fence adjustment. Includes bit safety guard for safe routing. Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts. Large opening in fence for big router bits. Aluminum fence backer features front- and rear-mounted universal T-tracks that accept 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' Hex bolts. Includes new, larger steel stand, which measures 18''D x 24''W x 32''H. What's in the Box? (1) Rockler Pro Phenolic Router Table (1) Rockler Pro Router Table Fence (1) Rockler Router Standard Blank Plate (1) Bit Guard (1) Dust Port (1) Rockler Steel Stand

Rockler Pro Phenolic Router Table, Fence & Plate D

February 21st, 2013

Our brand-new pro tables feature one-piece 3/4'' solid phenolic construction for an ultra-flat, low-friction surface that won't warp, dent, scratch or delaminate. The whiter, brighter finish enhances visibility, while our new, flat CNC-machined router plates offer better precision and repeatability than ever before. 3/4'' T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence features two adjustable white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit guard. 10-point plate leveling/locking system. 24'' x 32'' table. 8-1/4'' x 11-3/4'' x 1/4'' aluminum plate.

Technical Details:
Includes Rockler Router Plate D which works with these routers: Bosch 1619-1619EV, Freud FT2000, DeWalt 625.
8-1/4'' x 11-3/4'' x 1/4'' aluminum plate is CNC machined for incredible flatness and precision.
Featuring 8-points of plate leveling and 2 locking points.
24'' x 32'' table for over five square feet of surface area.
Ergonomic T-knobs for easy fence adjustment.
Includes bit safety guard for safe routing.
Includes Rockler Pro Fence with extruded aluminum backer for straight, accurate cuts.
Large opening in fence for big router bits.
Aluminum fence backer features front- and rear-mounted universal T-tracks that accept 5/16'' T-bolts, 1/4'' T-bolts, and 1/4'' Hex bolts.
(more…)

RSS Feed

Search