Woodhaven 4951 Large Cut-off Sled

April 24th, 2013

This is the safest and most accurate way to cut large parts on a table saw. Our 4951 Cut-Off Sled functions like a sliding table saw, but at a fraction of the cost! 2-3/8" thickness capacity on a 10" saw. Clear Guard protects you from debris and allows visibility. Handles stock up to 26-1/8" wide. Maximum part width between fence and Outboard Toggle Clamp is 22-1/2". Weighs 52 lbs. and measures 31-3/4" x 47-1/2" assembled. Extra 4519S Flip Stops available. Extra 24" Ultra Track and Track Connector to extend fence available. Optional 500 lbs. Inboard and Outboard Toggle Clamps available for maximum part holding force. Toggle Clamps are visible in image as an example but are not included with the 4951.

Woodhaven 4965 Super Sled

April 21st, 2013

The Super Sled does it all! The sliding platform measures 23-3/4" square x 3/4" thick. It provides a zero-clearance edge for easy part alignment and clean cuts. Designed to be used on a table saw with at least a 27" deep table. 2-3/8" thickness capacity on most 10" saws. Platform supports parts for crosscuts up 19-1/4" wide (fully supported on platform) or 17-1/4" wide with platform toggle clamps attached. 28" taper length capacity.
Includes a 23-3/4" adjustable steel miter bar that eliminates any side play. Bar rides in your saws 3/8" x 3/4" miter slot. Slot must be between 4" to 7-1/2" from the blade, measured from the blade side of the slot. Can be used in the left or right miter slot. Bar attaches to the platform for either crosscut or taper operation and switches in minutes.
32" Ultra Track fence mounts horizontally for tapers or vertically for crosscuts. Fence can be pivoted clockwise or counterclockwise on the platform for unlimited crosscut and taper settings. All fence adjustments made with knobs.
Indexing holes in platform and stainless steel indexing pins set the fence at the most common angles of 0, 15, 22.5, 30, 36 & 45º. Like our Deluxe Miter gauge, this pin setting method takes the guess work out setting angles and insures the best accuracy. Angles are engraved in the platform for easy reference. Other angles can be set using our optional Mite-R-Gage, or a digital protractor you supply.
Includes a 4519 3" Straight Flip Stop for use with crosscut work on the vertical fence.
Includes an edge stop for use with taper work on the horizontal fence.
Includes two 500 lb. toggle clamps and hardware. Clamps hold stock up to 1-3/4" thick and mount on the horizontal fence for holding tapers, or to the platform for holding crosscuts.
Optional 6305R 1" Riser Kit increases toggle clamp capacity to 2-3/4" thick stock, one required for each clamp.
Optional 789S Flip Stop is used with the fence in the horizontal position.

Woodhaven 1435 EZ Lift

March 3rd, 2013

The 1435 EZ Lift has a 3.5" motor opening that accepts the router motor from a Bosch 1617 & 1618, DeWalt 616 & 618 and Porter Cable 690 & 892. Features a smooth UHMW glide system on solid aluminum extrusions for a strong, easy to adjust unit. Weighs 10lbs without the router. Covered under US Patent #5,699,844.

Woodhaven PTM120 24″ x 32″ Phenolic Table

March 2nd, 2013

When I got my first router at 11, held it in my hands and turned it on, it scared the bejesus outta me. I quickly figured out that instead of holding it, I'd rather put it in a table – like a shaper. But unlike a shaper, the router bits cost less and there are more styles to choose from. Our tables are stable, flat and long wearing for years of use. Removable plate allows the router to lift out for bit changes or portable use. Includes our Patented 147 Insert Plate, 1300 Plate Levelers and a T-slot miter slot machined right into the top. CNC machined for accuracy.
This tough solid phenolic table is 3/4" thick and isn't as quiet our MDF tables, but is a better choice for humid climates or hard use.

Woodhaven 6010 HD Mortising Table

March 1st, 2013

The 6010 HD Mortise Table is designed for more serious woodworkers. It's 4" tall and quickly attaches to the 6000-6004 Horizontal Router Table (not included – order separately) in place of the phenolic table. Also fits previous 576-578 models.
X & Y feed handles provide precise feed control. Uses the same aluminum extrusions & glide system that we use on our 1435 EZ Lift. Stops let you adjust the mortise length (up to 6") & depth (up to 2-1/4").
The generous 15-3/4" square x 1/2" thick solid phenolic table attaches in one of two positions so the 16" Ultra Track fence can be angled anywhere from 0º to 90º. Includes two 500 lb. toggle clamps that hold stock up to 1-3/4" thick. Optional 6305R 1" Riser Kit increases clamp capacity to 2-3/4", two required.
Holds parts weighing up to 20 lbs., when centered on the table. Cantilevered parts may require additional outboard support.

Woodhaven 8231K MDF Router Table & Fence Kit

February 24th, 2013

This is by far the best value if you're considering a router table setup. Here's everything you need – all at a discount! Included with the kit is a FREE plate drilling ($15 to $20 Value) for supported routers. Simply go to the plate drilling section of our site and click the drilling you need!

Woodhaven 8233K MDF Router Table, Fence & Stand Kit

February 23rd, 2013

This is by far the best value if you're considering a router table setup. Here's everything you need – all at a discount! Included with the kit is a FREE plate drilling ($15 to $20 Value) for supported routers. Simply go to the plate drilling section of our site and click the drilling you need!

Woodhaven 8536 3-1/2″ Hinge Jig, 5/8″ Radius

February 12th, 2013

Our heavy duty Hinge Jigs are the fastest, easiest and most accurate way to rout hinge, strike plate and lockset mortises.
Uses a bearing guided bit, or bushing & bit combination (both sold separately), to follow the jig for perfect mortises.
Jigs attaches to a 3/4" wood fence you supply with the included hardware. The fence provides chip-free cuts and easy indexing.
Two screw-in indexing pins position the fence to the backset you want and insure it's square on the jig.

See the Hinge Jigs in action on YouTube!

Woodhaven 8243K Phenolic Router Table, Fence & Stand Kit

February 6th, 2013

This is by far the best value if you're considering a router table setup. Here's everything you need – all at a discount! Included with the kit is a FREE plate drilling ($15 to $20 Value) for supported routers. Simply go to the plate drilling section of our site and click the drilling you need!

Woodhaven 8241K Phenolic Router Table & Fence Kit

February 6th, 2013

This is by far the best value if you're considering a router table setup. Here's everything you need – all at a discount! Included with the kit is a FREE plate drilling ($15 to $20 Value) for supported routers. Simply go to the plate drilling section of our site and click the drilling you need!

RSS Feed

Search